How to dispose of coffee grounds from french press

You know how cast iron gets seasoned with use, developing a lovely non-stick patina and becoming more and more amazing? Well, your French press coffee maker doesn’t work that way. Any leftover grounds or a film of old oil is a great way to handicap yourself in the pursuit of excellent coffee.

Thankfully, learning to clean your French press is cheap insurance against ruining an otherwise perfectly good cup of coffee!

Ok, once you’ve gathered your materials, lets get started!

1. Remove your old coffee grounds

A good French press makes a lovely cup of coffee but unlike drip coffee makers, the grounds aren’t neatly enclosed in a paper filter that you can just throw away when you’re done.

The easiest way to dispose of the grounds is to rinse them down your sink…but wait! This practice is strongly discouraged by nearly every plumber as it can result in clogged pipes!

Slightly less easy, but infinitely less likely to clog your pipes, is filling the French press with a little water and pouring the water and grounds into a mesh sieve. Rinse the plunger off over the sieve if you want to ensure the least amount of grounds make it into your pipes.

If knocking out the sieve feels like too much work you can line the sieve with a paper towel, although personally, I feel that is superfluous. As an added bonus, by not flushing the grounds down the sink you can save them for other uses! Coffee grounds are compostable, are beneficial in gardens, and can even be used as an exfoliant (1).

2. Disassemble your French press Completely

For proper cleaning, you are going to want to break down your press all the way. Most French presses can be broken down into 5 components:

1. Pitcher
2. Cross plate (the plastic or stainless steel bottom piece of the plunger)
3. Mesh filter (the middle piece of the plunger)
4. Spiral plate (the stainless steel top piece of the plunger)
5. The plunger rod/lid assembly

In order to disassemble most French presses, you’ll need to unscrew the plunger base from the rod. The base will easily lift apart once the rod has been removed.

3. Scrub and rinse each part

Once you’ve broken down the press into its component pieces, it is time to get cleaning. Unless your press came with instructions to the contrary, the best way to clean a press is in the dishwasher.

If you’re in a hurry to get your press clean so you can get to brewing your next pot ASAP, then you’ll want to use dish soap, a sponge or brush, and hot water. While you might worry about scratching the pitcher, unless you are using hardened steel (2), the borosilicate glass (3) most presses are made of will easily stand up to whatever scrubber you select!

The mesh filter is the only component you’ll want to handle carefully. Occasionally the edges can be flipped up and either begin fraying or even give you an unexpected cut.

Some sources on the internet strangely suggest that you should not use soap on plastic as it will pick up the flavors of the soap… Uh…what? Unless the manufacturer specifically says otherwise, soap is entirely safe to use on your French press! A thorough rinse with hot water should clear your press of any residual soap.

If you’ve got particularly stubborn stains, use a paste made of baking soda and dish soap. Let the paste sit for a few minutes and then scrub. The moderately abrasive texture of baking soda helps to buff off deposits while the dish soap breaks down residual oils. Rinse with hot water and you’ll find that most stains are easily removed.

4. Reassemble your french press

You’re almost there! Just put the parts back together and your press will be ready to use! The parts should be almost impossible to put back together incorrectly… but in case you need a reminder:

The cross plate is the bottom of the plunger assembly. Put the mesh screen and then the spiral screen on top of the cross plate. Gently thread the plunger rod onto the assembled plunger base. Voilà! You’ve done it!

5. Make more coffee, or allow to dry

If you’re making coffee immediately, then a bit of residual dampness will not be a problem. Prepare your coffee as usual and enjoy.

PRO TIP – Cleaning your French press soon after use will make for an easier job. Plus, you’ll be well-caffeinated!

If you are just cleaning your press and don’t intend on using it immediately, you’ll be best off allowing it to dry completely before putting the plunger back in the pitcher. Otherwise, you risk mold or minor discoloration from the stainless steel oxidizing.

Final Thoughts

French presses make a delicious cup of coffee, and you shouldn’t be afraid to use one just because they are a bit more involved to clean than drip coffee makers. Just disassemble your press, put it in your dishwasher, and let technology do the work. If you’re in a hurry, the process requires a bit of time, but isn’t particularly onerous. The pleasure of a delicious cup of coffee certainly makes the effort worthwhile!

If you want some tips and tricks, just check out our brew guide for making amazing french press coffee. Don’t forget to choose the right type of coffee to make your drink truly delicious.

Top 17 how to dispose of coffee grounds from french press edited by Family Cuisine